J45Fs DC Fluorine Plastic Globe Valves, designed to control highly corrosive media with a variety of fluoroplastics on the surface of the body cavity for different operating temperatures and fluid lines. High strength, good corrosion resistance.
Straight through lined with fluorine valve manufacturing and standards
Design and manufacture: GB12235
Structure length: GB12221 (1 series)
Flange connection size: GB4216 JB78
Straight-through fluorine valve material:
Body, bonnet: HT200, ZG230-450, ZG1Cr18Ni9Ti
Spool: 1Cr18Ni9Ti, Division TiLai alloy surfacing, enhanced PTFE
Packing: PTFE, flexible graphite, stainless steel bellows
Putter, bushing: 2Cr13
Gasket: rubber asbestos board, 1Cr18Ni9Ti, graphite spiral wound gasket
Drive mode: manual, electric, pneumatic
Suitable temperature: ≤80 ℃, ≤100 ℃, ≤120 ℃, ≤150 ℃, (according to lining material)
Pressure rating: 0.6,1.0,1.6
test
Lining: Spark detection
Experiment and test according to GB / T13927 standard
Nominal pressure: PN Body: PN × 1.5 Seal: PN × 1.1
J45Fs DC Fluorine Plastic Globe Valve Parts List:
1, body, 2, body lining 3, valve cover 4, valve
5, cap 6, stem 7, hand wheel
J45Fs DC Fluorine plastic globe valve Dimensions:
Nominal diameter | Nominal pressure | Work pressure | L | D | D1 | n-Фd | f | H1 | H2 | D0 | quality |
25 | 1.6 1.0 | 1.6 | 160 | 100 | 75 | 4-2 | 2 | 2595 | 280 | 120 | 4.5 |
32 | 200 | 120 | 90 | 4-14 | 2 | | | 140 | 13 |
40 | 200 | 130 | 100 | 4-14 | 3 | 320 | 353 | 140 | 9.5 |
50 | 230 | 140 | 110 | 4-14 | 3 | 342 | 375 | 160 | 16.5 |
65 | 1.0 | 290 | 160 | 130 | 4-14 | 3 | | | 180 | |
80 | 310 | 190 | 150 | 4-18 | 3 | 467 | 520 | 200 | 32 |
100 | 350 | 210 | 170 | 4-18 | 3 | 532 | 600 | 280 | 45 |
125 | 400 | 240 | 200 | 8-18 | 3 | 604 | 685 | 280 | 67 |
150 | 480 | 265 | 225 | 8-18 | 3 | 635 | 728 | 320 | 89 |
200 | 0.6 | 495 | 320 | 280 | 8-18 | 4 | 735 | 866 | 400 | 145 |
250 | 622 | 375 | 335 | 12-18 | 4 | | | | |
300 | 698 | | | | 4 | | | | |
【Print】 【Close】
